The production line of disposable plane mask machine is mainly composed of plane mask conveyor, mask turnover conveyor and two plane mask ear belt machines. After the plane mask conveyor outputs the mask body, the conveyor belt structure transmits the mask body piece to the turning mechanism. The mask plate is turned over to the conveyor belt connecting the ear belt conveyor through the turning mechanism, and then the mask plate is conveyed to the upper part of the face of the ear belt conveyor through the conveyor belt. Subsequently, the ear belt welding of the mask is completed by the ear belt conveyor, so as to complete the production process of a flat outer ear belt mask product.
Video of disposable face mask machine:
General drawing of equipment
Equipment technical requirements equipment technical requirements, data and data:
Main power supply: 220VAC
Frequency: 50Hz
Installed power: 20kw
Air pressure: 0.5-0.7mpa
Length: 6750mm
Controller: Huichuan PLC
Width: 3560mm
Operation interface: Huichuan touch screen
Height: 1950mm
Relative humidity: 5-40%
Weight: ≤ 2500kg
Temperature: 10-35 ℃ 1.3
Introduction to the structure of face mask machine:
Automatic delivery of raw materials
1. The upper and lower cloth paths are the same.
2. The small knurled hand wheel in front of the winding shaft can fine tune the cloth offset;
3. Put the star handle behind the reel to adjust the fabric tension.
Shaped mask delivery
1. Folding mechanism, left and right adjustable folding depth, position;
2. The nose line feeding and loading mechanism can adjust the length and position of nose line;
3. Embossing mechanism, loosen the bolts on both sides of the embossing roller to adjust the position of the cutting knife and the pattern, and the spindle Slowly press down the embossing roller after the cloth movement, with moderate force;
4. The cutter mechanism, the spindle with cloth movement, slowly press down the cutter roller with moderate force;
5. Differential conveying mechanism, turn the motor speed control knob to adjust the conveying speed of the conveying mechanism.
Mask flip conveyor
1. Left and right turning mechanism of mask;
2. The mask conveying mechanism a turns the inverted mask over again, with the face up after turning over, and transmits it to the welding conveying line a of the outer ear of the mask;
3. The mask conveying mechanism B turns the inverted mask over again, with the face up after turning over, and transmits it to the welding conveying line B of the outer ear of the mask;
Plane mask outer ear belt machine
1. Mask conveying chain plate mechanism, one chain plate and one station, mask conveying to chain plate, sensor triggering, chain plate conveying one station forward;
2. Fuse the left ear belt mechanism, extend the take-off cylinder, clamp the take-off clamp claw cylinder when in place, open the take-off clamp cylinder, pull the take-off cylinder, close the take-off clamp cylinder, take off the line and lower the cylinder downward, clamp the ear belt clamp claw cylinder, open and close the take-off clamp cylinder, open the take-off clamp claw cylinder, take off the line and lower the cylinder upward, rotate the cylinder, take off the line and lower the cylinder Down, the ultrasonic upper and lower air cylinders are pressed down, and the ear band is welded by ultrasonic; after welding, the ultrasonic upper and lower air cylinders are up, the upper and lower air cylinders are up, and the wire take-off rotating air cylinders are rotated, and the above actions are repeated;
3. The right ear belt mechanism is fused, and the action is the same as that of the left ear belt mechanism;
4. Forming mask tablet pressing mechanism;
5. Forming mask conveying mechanism;
Do not put your hand in front of the scissors, or under the welding head to avoid personal injury caused by misoperation.
∷ 
Sweep WeChat yards pay attention to us
